Distillation has been the central element in processing natural gas liquids (NGL) for about a century. It has traditionally relied on a four-tower design, but dividing wall columns (DWCs) now enable this process to be scaled down to three towers.

The DWC concept has been explored for at least 40 years, but a variety of factors have slowed development, particularly after early research and development failed to demonstrate significant benefits under a few limited operating conditions. The concept began to be proved as technological advancements allowed thousands of simulations to be run under dozens of operating scenarios.

The result is a DWC design that has been patented by Burns & McDonnell and is already being used in commercial operation. Results in the field are confirming early evaluations that showed up to a 40% reduction in energy requirements, up to 30% less capital investment and up to 50% less plot required when compared to a traditional system.

How It Works

DWCs offer midstream NGL processors, refineries and chemical plants the ability to reduce operating and capital costs by reconceptualizing traditional distillation systems, which are capital-intensive to build and require significant energy to operate.

A DWC sounds like a simple concept, but is surprisingly complex. It is not only a physical wall, but also a varied process configuration that exploits the wall to improve thermal efficiency and reduce capital cost. These dividing sections combine what previously required multiple distillation systems into a single system with multiple products.

 

A traditional configuration would be composed of two distillation systems — a depropanizer and debutanizer. The first step in integrating the systems would be using a single column; however, this configuration has a significant drawback — it is impossible to produce high-purity butane (the intermediate product).

A second, smaller column is necessary to maintain purity. This column is fitted with either an independent reboiler and/or condenser using a side stripper and/or absorber. The two columns are partially thermally coupled, resulting in removal of one thermal system and a modest reduction in heat and capital cost. If the two columns are integrated into either a closed top or closed bottom DWC, capital costs may be reduced further. Even more savings may be realized under a final level of integration to remove another thermal system by opening the closed section and allowing vapors and liquids to move in and out of the bottom of the divided section.

Why It’s Important

The composition of the liquid stream coming into an NGL facility can vary. Depending on market conditions, it could have a lot of ethane or very little. In other instances, it may have a lot of gasoline materials, or may be mostly propane. The patented DWC application is flexible enough to handle all those variations and meet specifications under unique conditions for each of the five purity products: ethane, propane, isobutane, normal butane and natural gasoline.

That flexibility — in combination with lower carbon emissions, easier permitting processes and big capital cost savings — translates into a big industry win that will only grow in importance as pressure mounts to meet environmental, social and governance (ESG) goals.

Thought Leaders

Andrew Becker

Process Technology Manager
Burns & McDonnell

GO BACK   

Related Content

White Paper

Dividing Wall Columns Bring Efficiency to the Process Industries

Burns & McDonnell

Distillation is essential to the chemical industry, yet these systems have remained unchanged for decades. Dividing wall columns (DWC) offer refineries the ability to reduce operating and capital costs by reconceptualizing the traditional distillation systems.

Blog

First Three-Tower Frac System Offers Sustainable, Lower Cost Solution

Burns & McDonnell

Change can be challenging in the established midstream market, but a dividing wall column offers benefits that may make it a worthwhile innovation.

Burns & McDonnell Issued Patent for Use of Dividing Wall Columns in the Natural Gas Liquids Industry

KANSAS CITY, Missouri — Burns & McDonnell has received a patent from the U.S. Patent and Trademark Office for an innovative dividing wall column (DWC) designed for the natural gas liquids industry.

LOAD MORE  

---

In This Issue

Article

What’s New in Nuclear? Advancing Safety and Affordability

BenchMark

There is a broad menu of options available to begin bringing down carbon dioxide (CO₂) emissions on a global scale. While many agree nuclear energy will (or should) be part of the solution, just how it is developed and deployed elicits a wide range of opinions. From cost and safety considerations to waste disposal, the issues that have dogged the nuclear industry for decades are still very much in play.

Article

Refining Your Renewable Fuels Approach for Success

BenchMark

Producing renewable fuels is a potentially rewarding opportunity for refiners to enhance their services for profitable and lasting portfolios. From feedstock and technology selection to project delivery methods and complementary projects, several considerations can affect the feasibility of such projects.

Article

Tech Talk: Embracing New Realities

BenchMark

AEC firms want to make client projects successful as they design, engineer, build and maintain the planet’s critical infrastructure. Doing so efficiently requires determining just what roles technology can play as we stand on the threshold of a worldwide digital transformation.

Article

Investing in an Energized Future

BenchMark

The electrical transmission and distribution industry is experiencing massive change. The need to improve our current power system is a critical component driving that evolution — and it’s requiring electric utilities to act.

Article

The Grant Proposal: A Story Worth Millions of Dollars

BenchMark

Securing grant funding can be a laborious task, but applicants can use this opportunity to collaborate with local leaders, build relationships with funding agencies and envision their ideal project.

Article

We Like IKE: Modernizing Kansas Transportation

BenchMark

From big cities to small farm towns, everyone needs and deserves safe transportation infrastructure. The IKE Transportation Partners joint venture is advancing the delivery of various projects in support of KDOT’s 10-year modernization program.

Article

Charging Forward With Clean Energy

BenchMark

Achieving clean energy goals is rapidly becoming a cost of doing business. Learn how industrial facilities can respond to these mounting pressures and develop a road map to implement sustainable solutions.

Article

Supporting Emerging Clean Energy Technologies Through Thoughtful Partnerships

BenchMark

A more sustainable energy future is achievable, but the path to get there requires investment in and promotion of emerging technologies that will help transform the global economy.